Directions

Spread out the new diaper and raise the inner gathers, lift the diaper over your baby's navel. Hold down the side of the diaper and pull the tape over.Ensure both sides are symmetrical before fastening. Fasten the tape and give a slight tug at the back to ensure that the tape is in place. Adjust the side gathers around the thighs and ensure that the side gathers are not folded inwards.Open a new piece of pants, put your hands through the bottom of the pants diaper and gently ease your baby's legs into the openings. If you are putting on the pants diaper while your baby is standing, make sure he can support himself. Stretch the pants diaper open and place one foot in first before the other. Lift the waistline of the pants diaper above your baby's navel Check the fit around the elastic waistband and ensure that the gathers around the thighs are not folded inwards. * Use your fingers to adjust the inner gathers, so as to prevent leakage.

Ingredients

Top layer is made of non-woven gentle microfiber textile// Inner absorbing layer is made of palm wood fibres whitened by the use of bleachless technology and polymeric absorbent granules.The paper pulp after grinding is mixed with the polymer to produce a thin layer. This becomes the absorbent core//Outer layer is made of air permeable impregnated non-woven textile and/or polyolephine film//Stickers and the adhesive tape is also made of air permeable/perforated polyolephine, for the elastics synthetic or natural rubber is used. The tape is less than 1mm wide

Warnings

Stop using if irritation occurs. Do not flush in the toilet.Do not flush down the toilet.